how to draw simple 3d drawings on paper

Download Article

Download Article

3D drawings use optical illusions to make it appear that an image has depth. This technique can brand any drawing come to life. It may seem difficult to achieve but it is actually easier than information technology appears. With a few techniques, yous tin can make 3D drawings of a wide variety of objects.

1. 1

   Draw a square. Creating a 3D box begins past simply cartoon a square with your pencil, since some lines may demand to be erased. The square can exist a variety of sizes, but information technology should simply have up a quarter of the page at most. Center it on the page, so in that location is room to draw the residual of the box.<

   • In the final drawing, this showtime foursquare volition serve as the front of your box.

2. 2

   Draw a second square that intersects with the start square. Place the 2d foursquare positioned slightly to one side and above the starting time square. Begin by drawing the bottom line of the 2d square so its center intersects with the eye of the left side of the first foursquare. Then depict the right side of the 2nd square so that its center intersects with the center of the top of the showtime square. Then finish drawing the tiptop and left side of the second square.

   • The second foursquare should be exactly the same size as the first square.
   • This second square will exist the back of the cube in the concluding drawing.

   Advertisement

3. 3

   Add together lines to connect the ii squares. Connect each corner of the commencement square to its respective corner on the second square. For example, describe a line from the upper left-hand corner of the first square to the upper left-hand corner of the 2d foursquare.

   • These lines will create the illusion of the top, bottom, and sides of the cube.

4. 4

   Erase the lines to brand the cube wait solid, if necessary. If you lot are trying to depict a solid cube, equally opposed to a transparent one, you demand to erase some of the lines you have fatigued. Erase any line that you wouldn't be able to see from the bending yous accept drawn.

   • Lines to erase include the bottom right-mitt side connecting line, the right-paw side of the 2d foursquare, and the bottom line of the second square.
   • Information technology may seem strange that you needed to draw these lines in the first identify, but they helped you draw the cube in the right shape.

5. 5

   Color the sides of the cube if yous like. To highlight the 3D perspective of your drawing, you can color each side of the box a dissimilar color. This makes information technology articulate that the drawing has depth and that each side of the box is distinctive.

6. 6

   Depict variations of the 3D box. One time you get the hang of drawing the 3D box, yous tin beginning drawing other shapes, such as a rectangular box. For a rectangular box, start past cartoon a rectangle. Then draw a 2d rectangle slightly to i side and to a higher place the first. Finally connect the corresponding corners of both rectangles together.

   • Yous tin can do other shapes, such as triangles, stars, or abstruse shapes.

   Advertisement

1. 1

   Cull the object you would like to draw. The object you lot pick needs to have a clear and elementary outline, every bit this will get in easier to create your 3D cartoon. For case, you lot could depict a hand, a banana, or a doughnut. Each has a simple outline and overall shape.^[1]

   • Trace the detail you desire to describe if information technology is a size that fits on your slice of paper. For case, you can use your hand, every bit information technology volition fit on a standard slice of paper and tin easily exist traced.

2. 

   2

   Make a lite preliminary outline of the object with pencil. Either draw or trace the outline of the object you lot want to draw on your slice of newspaper. Center the object on the page, although information technology tin affect the top or lesser of the newspaper if necessary.^[two]

   • Draw this outline lightly so you lot tin erase any unnecessary pencil marks later in the procedure.

3. 

   3

   Draw horizontal, parallel lines across the page. Embrace the whole the whole newspaper with these lines except for within the shape you take outlined. Make the lines close together, at virtually 0.25 inches (0.64 cm) autonomously all the way downward the page.^[3]

   • It's easiest to draw these lines by using a ruler, so that they are completely straight and evenly spaced.
   • If you are using lined notebook paper, you could trace over the existing lines

4. 

   4

   Draw curved lines inside the shape outline. Get-go each of these curved lines where i of the direct parallel lines touches the outline. Draw the curve across the entire outline and and so come up dorsum down, connecting at the stop to the corresponding straight line on the reverse side of your outline.^[4]

   • Each curved line volition complete a horizontal line that goes all the fashion across the page.
   • The curved lines should mimic the general shape of the item you are drawing. If the shape varies, the lines should gradually transition to follow the object'due south shape.

5. 

   5

   Trace over the completed horizontal lines. To make the 3D effect really popular, define the lines you have drawn. Trace the entire length of all of these lines, including the directly sections and the curved sections. Yous can use a pen, colored pencils, or marker to trace the lines.^[5]

   • The ink tin be done in any ane color or in a diversity of colors.

6. vi

   Erase the pencil outline. After the ink has dried, erase the initial outline that you made. This will add to the 3D effect of your drawing and brand the object popular off the page.^[6]

   Advertisement

1. 

   1

   Report your subject. If you want to draw something in 3D that you lot have in real life, it tin can be help to look at its details. By looking at it, you lot tin can begin to understand how you lot will translate existent world depth on to a apartment surface.

   • For instance, if you want to draw a bowl of fruit sitting on a table, you should written report how all the elements of your composition relate to each other. How much of the fruit, bowl, and tabular array can you see? Where does each part intersect with the others? Where are shadows located and where does the light striking your objects?

   EXPERT TIP

   Kelly Medford is an American painter based in Rome, Italy. She studied classical painting, cartoon and printmaking both in the U.South. and in Italia. She works primarily en plein air on the streets of Rome, and too travels for private international collectors on commission. She founded Sketching Rome Tours in 2012 where she teaches sketchbook journaling to visitors of Rome. Kelly is a graduate of the Florence Academy of Fine art.

   

   Kelly Medford
   Professional Artist

   Try different exercises to train your eye. Kelly Medford, a plein air painter, says: "One mode to learn to draw in 3D is to do blind contour drawings. Look at the object that you're drawing and never look at your newspaper. It forces your eyes to go slowly around the object with your manus following your eye on the paper. You lot start seeing objects without preconceptions."

2. 

   two

   Start a drawing with a horizon line. For drawings that aim to show a great altitude, it'due south of import to create a horizon line where the sky meets the country. This line creates a point that is the furthest abroad from the viewer. It should usually be located between a tertiary and half of the fashion upwardly your page and bridge the entire page.^[7]

   • This is a smashing mode to start a landscape drawing. One time you draw the horizon line, you can brainstorm drawing the foreground beneath it and the sky or large objects in the landscape to a higher place information technology.

3. 

   3

   Incorporate a vanishing point in to a drawing. A vanishing indicate is the spot where items in the distance disappear. In practical terms, it is the spot where parallel lines that get from the front of the image to the back of the image come together on the page. Marking this spot at the center of your horizon line allows you to accept a spot to stop items that are moving into the distance.^[eight]

   • For instance, if yous are looking straight down a road, there is a indicate in the distance where you lot tin can no longer see the route. While the route will be wide at the bottom of your drawing, which is the spot closest to the viewer, the sides of the road will come together and terminate at the vanishing bespeak.

   EXPERT TIP

   Kelly Medford is an American painter based in Rome, Italy. She studied classical painting, drawing and printmaking both in the U.S. and in Italian republic. She works primarily en plein air on the streets of Rome, and also travels for individual international collectors on commission. She founded Sketching Rome Tours in 2012 where she teaches sketchbook journaling to visitors of Rome. Kelly is a graduate of the Florence Academy of Art.

   

   Kelly Medford
   Professional person Artist

   Utilize transparent sheets to larn perspective. Kelly Medford, a plein air painter, says: "To learn perspective and foreshortening, utilize plexiglass or transparent sheets. Accept photographs of buildings that are in perspective and trace over them with tracing paper. You lot showtime to understand how angles get back in infinite and are non flat."

   Advertizing

Add New Question

• Question

  How can I draw in 3D?

  

  First, you make your horizon line. After that, yous make up one's mind your vanishing point. You may draw a line in that location if you would similar. Later that, describe your shape/picture/letter of the alphabet. So, draw lines from the edges of your shape to the vanishing point. Practise non draw from the edges that volition pierce the object. So, in one case all of the lines that aren't piercing the object are connected to the vanishing betoken, cut the lines to notwithstanding long y'all wish the width to be. Erase the rest. Then, shade the opposite to where the sunday would be. This will go far appear three-D.

• Question

  How do I know when and where to shade something?

  

  JustCallMe Ashley

  Customs Respond

  It only depends on lighting. If the object y'all wish to draw is right in front of you, just report where the light hits the surface of the object and where the shadows correspond with the low-cal. Nigh shadows are in the corners or on the side where the light isn't reflecting off the surface of the object. Now the question of when? Well, first you must know where the lights hit the surface, Then you shade opposite of the lighted surface.

• Question

  How can I draw a 3D table?

  

  Get-go past cartoon a rectangle equally the tabletop. If it helps when drawing the 3D aspects, think of the rectangle as a long, stretched out cube. Then, draw four cylinders or 3D poles coming from each of the four sides. You can wait online for images of 3D tables and copy those if that's easier.

• Question

  How do I draw in 3D using a pencil on paper?

  

  First, draw a horizon line. From there, use a technique to make the particular appear like it is rising from the horizon line. Practise the outline first, and and so fill in the small details.

• Question

  How do I depict a 3D car?

  

  Draw a car and then depict extensions through the dorsum. Also get to dragoart.com, they help with anything regarding cartoon.

• Question

  How practise I draw animals in 3D?

  

  Brandon Ross

  Community Answer

  Draw the exterior as the inside and then fill with ink and let dry out.

• Question

  What are some shortcuts for making a 3D drawing?

  

  Just make a vanishing point and draw guidelines. Y'all tin draw objects between them.

• Question

  Tin can I pigment in 3D?

  

  Y'all can make 3D artwork with any media, but since pigment is slightly harder to control, you may need more practice.

• Question

  Which things would I exercise to brand up a 3-dimensional model of a business firm?

  

  Break the house into basic shapes, like a pyramid for the roof and a cube for the business firm. So, you draw those 3D shapes stacked onto each other and add details.

• Question

  What's a vanishing point?

  

  A vanishing signal is a signal on the image aeroplane of a perspective drawing where the 2-dimensional perspective projections (or drawings) of mutually parallel lines in three-dimensional space announced to converge.

Ask a Question

200 characters left

Include your e-mail accost to get a message when this question is answered.

Submit

Advertisement

Things You'll Need

• Paper
• Pencil
• Pen, colored pencils, markers or other colouring options
• Eraser
• Ruler
• The object you want to draw or a picture of information technology (Optional)
• Stencil to make perfect shapes (Optional)

About This Article

Commodity Summary X

To draw a simple box in 3D, first by drawing a foursquare in the center of a slice of paper. Next, describe an identical square slightly to one side and to a higher place the first square so the two squares intersect. And then, add lines that connect each corner of the first square to its corresponding corner on the second square to complete the 3D box. Using this same technique, experiment by drawing other uncomplicated 3D shapes, such as triangles or stars! For tips on making your 3D objects look solid rather than transparent, read on!

Did this summary aid y'all?

Thanks to all authors for creating a folio that has been read 406,241 times.

Did this article aid you lot?

foleyhinew1972.blogspot.com

Source: https://www.wikihow.com/Draw-in-3D

Share this post